Collapsible Sluice Stand

Home > Gold Prospecting - FREE TIPS > Panning For Gold > Gold Prospecting EQUIPMENT (SEE ALL) > Collapsible Sluice Stand

Home > Gold Mining Equipment > Black Sand Magnets (Gold Magnet) > Black Sand Gold Recovery - Part 2 > Black Sand Concentrates > Fine Gold Recovery Equipment > Gold Prospecting - FREE TIPS > Panning For Gold > Gold Prospecting EQUIPMENT (SEE ALL) > Collapsible Sluice Stand

Product Description:
Collapsible Sluice Stand by Jobe. (sold out)

This zinc plated steel sluice stand is 18 inches wide, 36 inches long and designed to hold any sluice up to 14 inches wide.

Sluice box stand provides a sturdy platform to use a sluice as a highbanker, power sluice, or dredge.

The 1/2 inch square tubular legs are independently adjustable for leveling or setting any angle on any terrain. The legs are 18 inches long. This is a large full size sluice stand when assembled, but when disassembled, it takes up very little space and weighs only 6 pounds.

Jabbit Deep Water Sluice Box STAND (SOLD OUT)

The Jabbit sluice box stand is the only deep water stand that allows your sluice to weathervane with the current flow. No more building rock dams or searching in vane in fast moving water trying to find the ideal sluice set up spot. PUT YOUR SLUICE WHERE YOU WANT IT AND GET TO WORK QUICKER!

This for the stand only - sluice box is not included, but can be ordered separately.

The patented Jabbit sluice stand is the only deep water, self-driving stake with solid steel construction available. It can be used with many brands, sizes and widths of sluice boxes. See below for sizes it accommodates.

To use it, just "Jabb-it" into the sediment, slide on the "T-bar" to stabilize the bottom of your sluice box , attach your sluice to the "sluice box bar", slide your sluice box onto the stand and adjust for your desired height in the water.

The Jabbit sluice stand can be submerged into depths of up to 30 inches of water. Your sluice box will float effortlessly with its weathervane action in the current and stay in place without any extra rock stabilization.

When you are ready to empty your material, just slide your sluice box off, empty it, and slide it back on. You're sluicing again in minutes. When your done sluicing, the self-driving stake is built with a gritted handle and inner sleeve, so with a reverse pull up, it will then extract itself from the sediment.

The "Jabbit" shown here is holding a typical sluice box. The driving stake is a self-pounding stake that can be set in up to 30 inches of water. The sluice box bar is a bracket that attaches to your sluice box and allows you to mount it on the driving stake. It is adjustable to fit many widths of sluice boxes. To attach your sluice box, drill holes in your sluice box and secure it with the provided bolts and nuts. The T-bar sits below your sluice box to support it and keep it from dipping down in the water. The yellow L-rods on the T-bar do not need to fit tightly against or be attached to your sluice box. They are there to help you locate the T-bar in the water while placing your sluice box on the driving stake.

The driving stake has a gritted grip for handling in water and a welded steel collar on the inside for easy removal from the sediment. It weighs 12 pounds when assembled and disassembles easily for transportation.

Rock dam building is not necessary to stabilize the Jabbit in the sediment. The Jabbit stand can be submerged into depths of up to 30 inches of water. The Jabbit Sluice Box Bar accommodates sluice box sizes from 4" to 18" widths if mounted outside the box or 10" if mounted on the inside. The Jabbit T- Bar adjusts from 10" to 18" widths.

The Jabbit ships partially unassembled with easy and simple instructions for setup. The shipping box will contain a Driving Stake, Sluice Box Bar (including two 2" long 3/8" Bolts & Lock Nuts to mount your sluice box), T-Bar, L-Rods and instructions.

Jabbit Warranty - The Jabbit is warranted from welding defects for 30 days from delivery. If defects are found, contact mfg for replacement instructions. This warranty is void due to any misuse by the consumer.

This is a special order item - please allow extra time for delivery.

Sluice Stand with Adjustable legs (6" or 10" wide sluice)

RDH Sluice Frame / Stand features adjustable legs and is available for either 6" or 10" sluice widths. (10" wide stand is $15 additional).

Set your sluice up for high-banking or use as a recirculating set up. Sluice stand is designed for either a 6" wide or 10� wide sluice.

The rdss 10" sluice stand will fit any 10" wide sluice like the Keene A52, A51, RDH#48, RHD#36 or jobe yellow jacket sluices. the 6" rdmss stand will fit narrower 6" sluices.

Please note: This item is made upon order only, and will ship separately from other items in your order. Delays of 2-3 weeks are possible certain times of the year, due to order volume and possible parts shortages. Please order early and allow extra time for delivery.

Gold Prospecting Questions? EMAIL US

VISIT US ON FACEBOOK

READ THE GOLD FEVER BLOG

Gold Prospecting Equipment / Buy Gold Nuggets
Gold Panning Paydirt / Mining T-Shirts
Drywashers / Metal Detectors
Suction Dredging for Gold
Browse Site Map