The ST1 also known as the RP4 shaker table, is a compact table that will concentrate gold and other values down to as small as 500 mesh and can process up to 800 pounds of placer or hard rock material per hour! Ideal for use with rock crushers and active placer operations.
You can process material up to 1/4 of an inch with this table and it is equipped with built in nugget traps. All eccentrics have ball bearings for long life and precision action. The ST1 shaker table comes equipped with a magnetic separator that helps liberate the gold and provides for superior recovery.
It is used by hobbyists, laboratories, and small and large gold mining operations.
The st1 separates heavy mineral and gemstone concentrate
The ST1 Table has 4 discharge ports, an essential system for the professional:
Port #1: Pure Gold
Port #2: Roughing Port
Port #3: Midlings
Many miners retain their heavy sulfides for roasting to liberate unseen gold and will run them again later on the table.
This table must be bolted down (see second picture ST1B) and requires a 110 Volt power source. Dimensions are 43" x 17". Stand is not included but can be added for $349 plus shipping. Pump kit is not included but can be added for $295. You may order these options from the drop down menu above.
Email with your address for freight quote.
Sold without base. A steel base is available for $349 plus shipping (see second picture). This specially constructed steel base for the ST1 Shaker Table has thick wall welded steel tube.
Sample shipping: $260 to Montana for example.
Check youtube for many other videos showing the rp4 shaker table.
and we'll enter you
for FREE into our monthly GOLD GIVE AWAY!
Gold Prospecting Questions? EMAIL US
Copyright 2020 Motherlode Outfitters
Gold Panning Paydirt / Mining T-Shirts
Drywashers / Metal Detectors
Suction Dredging for Gold
Browse Site Map