Product Description:
This new Rock Crusher is from K&M Krushers. These crushers are the next generation of crushers.

All of the critical parts are cut out with a CNC Laser cutter to insure everything is square and precise. The bolts & nuts that hold the hammers and mount your motors are schedule # 8 alloy.

Your new K&M Krusher features a 11" Drum with a 2-1/2" Infeed Tube. The Hammers are a Rockwell Hardness of 62 on the outside and #58 on the inside turning your 2-1/4" rocks into 100-200 mesh talcum powder. Easy 3 wing knobs for front plate removal. (Always look for gold in the back/bottom corner of the drum) The screen in the bottom of the drum is now fitted with a new easy replacement system. The screen is stainless with more holes per inch than any other crusher allowing more thru-put.

The Gas Motor is a Kohler 7 Hp Motor that is backed with a 3 Year Commercial Warranty. This motor features a 4 stage air-filter and 3 fuel filters. Its a 4 stroke motor and designed for hard work. This crusher will come in 2 shipments, 1 is the Motor & the other is the crusher & all the parts to mount the motor.

******The Gas Motor is a Kohler 7 Hp Motor that is backed with a 3 Year Commercial Warranty. This motor features a 4 stage air-filter and 3 fuel filters. Its a 4 stroke motor and designed for hard work. Kohler Model #CH270 ******

Motor Details:

This gasoline engine features a 4-cycle, slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean™ 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty.

User-Friendly Maintenance.
Interference free PTO face
Dual oil fills and drains
No tools required all season air cleaner
Easy access throttle, choke and shutoff
Oil Sentry™ automatic low oil engine shutdown system
Carburetor bowl drain
High Power Performance.
Overhead valve design
Increased displacements
High-inertia flywheel
Extended Run Times.
Large metal fuel tank and chrome plated cap
Swirl induction combustion chamber
Quiet, Smooth Operation. Oversized muffler with heat shield
Mechanical governor
Sound-deadening alloy crankcase
Silenced air intake
Easy Dependable Starts.
Electronic ignition system
Automatic compression release
Dual ball bearings
Indexable, easy pull recoil starter
Reliability and Long Life Design.
Quad-Clean™ heavy-duty cyclonic air cleaner
Warm air intake system for cold weather operation
Cast iron cylinder bore
Steel-forged crankshaft
Stellite-faced exhaust valve
Water trap to separate moisture in fuel
3 fuel filters: fill neck, in tank, and carburetor inlet
3 year commercial warranty

The Crusher & Motor together weighs about 99 Lbs

This unit is built to last with heavy duty construction. Turns rock into a talcum power like dust 100-200 Mesh, and does 100-500 Lbs per hour - get ready to process and get your GOLD

International & HI & AK and all other places other than the Lower 48 States must Call or email us for a freight or UPS Quote

Please note: Due to the large size and weight of this package, additional shipping cost may apply. Some regions may have delivery surcharges added by the carrier. Your order will be adjusted to match our freight cost. Contact us in advance for a no obligation freight quote.